New approach to mimic rheological actual shear rate under wall slip condition

Engineering with Computers - The presence of wall slip in concentrated suspensions affect the rheological measurements such as shear stress, shear rate, and viscosity. The measured shear rate will...     

水文序列相依变异识别的RIC定阶准则——以自回归模型为例

水文过程相依性是水文变异的主要表现形式之一,应用自回归模型对其进行拟合时合理确定模型阶数是一个难点问题。本文在分析AIC和BIC准则的基础上,提出了一种以原序列与其相依成分的相关系数作为拟合度指标,同时借用信息熵形式的函数式,作为模型不确定性度量指标的自回归模型定阶准则(简称RIC准则)。以AR(1)、AR(2)、AR(3)和AR(4)模型为例进行统计试验,将不同序列长度下该准则的定阶准确率与其他定阶准则进行比较,试验结果表明,RIC准则对于上述模型均具有较好的适应性,且定阶准确率远高于AIC准则,其中对于前三阶模型RIC准则优于BIC准则,但四阶模型略低于BIC准则。RIC准则的优势是可以同时满足模型定阶、相依程度分级与模型检验的需求,将其应用于实测水文序列分析,结果显示,该准则能较准确地识别自回归模型的阶数,且符合提出的"相依有变异而残差无变异的最小阶数"的检验标准。     

Enhancement of energy storage density in antiferroelectric PbZrO3 films via the incorporation of gold nanoparticles

In this work, antiferroelectric Au–PbZrO₃ (Au–PZO) nanocomposite thin films were prepared by chemical solution deposition (CSD), and the effects of Au concentration on the antiferroelectric properties and the recoverable energy density were investigated. The results showed that the optimal Au concentration in the Au–PZO nanocomposite thin films was about 1 mol% for structural and electric properties. In the Au–PZO nanocomposite thin films with 1 mol% Au, Au nanoparticles (NPs) were distributed uniformly in the perovskite PZO matrix. Moreover, the recoverable energy density was 10.8 J/cm³ at 600 kV/cm, which is 42% higher than that of the pure PZO films. The results demonstrate that adding an appropriate amount of noble metal NPs in antiferroelectric thin films is an effective method to improve the energy storage properties.     

高炉喷吹煤粉燃烧性与反应性的研究与应用

为了研究高炉喷吹煤粉的冶金性能，采用热重分析法对6种无烟煤和1种烟煤进行燃烧性与反应性研究。结果表明，与无烟煤相比，烟煤在不同温度下的燃烧性和反应性均明显高于无烟煤。混煤的燃烧率实测值大于加权值，使用混煤可以发挥无烟煤和烟煤各自的优点，加快燃烧过程，提高混煤燃烧率。随着混煤中粒度小于74 μm煤粉所占比例的增加，燃烧率增大。在高煤比喷吹条件下，混煤煤粉粒度小于74 μm的比例控制在75%左右。结合无烟煤的燃烧性和反应性试验结果，建议喷吹煤粉采购中应尽可能多地采购无烟煤C资源，同时控制无烟煤E的采购量；高炉提煤比操作中应将无烟煤C确定为喷吹用无烟煤的首选煤种，以提升混煤燃烧率和发挥未燃煤粉保护焦炭的作用。     

Precipitation Mechanism and Reduction of Amount of Primary Carbides During Electroslag Remelting of 8Cr13MoV Stainless Steel

Metallurgical and Materials Transactions B - The precipitation and growth of primary carbides in 8Cr13MoV steel during electroslag remelting (ESR) were studied. The effects of melting rate and fill...     

Event-triggered Control for Heterogeneous Discrete-time Multi-agent Systems Subject to Uncertainties and Noises

International Journal of Control, Automation and Systems - This paper investigates the event-triggered control problem of heterogeneous discrete-time multi-agent systems (MASs) subject to...     

高熵合金制备及热处理工艺研究进展

与传统合金相比,高熵合金表现出了高强韧、良好的软磁性、高温稳定性、耐腐蚀性等突出特点,在许多的领域应用潜力巨大。本文主要介绍真空熔炼、粉末冶金、激光熔覆和磁控溅射等制备高熵合金方法的研究进展及优缺点,分析了不同热处理工艺对组织结构和力学性能的影响,并对高熵合金制备和模拟计算等方面提出了展望。     

冷轧退火对FeMnCoCrAl高熵合金组织和力学性能的影响

使用真空电弧炉熔炼出(Fe₅₀Mn₃₀Co₁₀Cr₁₀)₉₄Al₆合金,利用冷轧及在不同温度对合金进行退火,以期望得到由多尺度再结晶晶粒构成的层状结构;并对不同退火温度的样品进行拉伸性能测试。利用扫描电镜和EBSD对合金组织形貌进行表征,采用X射线衍射方法研究其相组成。结果表明:合金在铸态和冷轧后相组成未发生变化,700 ℃退火得到较好的多尺度再结晶晶粒的层状结构,其屈服强度为487 MPa,抗拉强度为708 MPa,断后伸长率为39%,表现出良好的综合力学性能。     

焙烧方式对含砷金精矿中金、银浸出率的影响

某含砷金精矿中金矿物嵌布粒度较细,金主要以硫化物(黄铁矿、毒砂)包裹金形式存在。采用焙烧预处理-氰化浸出工艺,研究了一段焙烧、两段焙烧和添加剂焙烧对氰化浸出的影响。结果表明,采用常规一段、两段焙烧方式,金浸出率均未达到90%,银浸出率低于50%; 添加剂焙烧效果显著,在焙烧温度650 ℃、时间1.0 h、添加剂用量NaXY 100 kg/t+YC-1 20 kg/t的条件下,金浸出率达到93.56%,银浸出率达62.45%。